Best Craftsman Sliding Compound Miter Saw in 2022 Reviews

This is the ultimate buyer’s guide to the Best Craftsman Sliding Compound Miter Saw. We would recommend using CRAFTSMAN V20 7-1/4-Inch Sliding Miter Saw Kit, Cordless (CMCS714M1) as it is a high-quality product.

We’ve compiled a list of the best Craftsman Sliding Compound Miter Saw you can buy right now. Below you’ll find our more detailed reviews & buyer’s guide, which should help answer any questions you may have before purchasing your new Craftsman Sliding Compound Miter Saw.

Best Craftsman Sliding Compound Miter Saw: Top Picks

The Best Craftsman Sliding Compound Miter Saw: Reviews

How do you know which Craftsman Sliding Compound Miter Saw is best for you? Many factors can influence your decision when you buy a Craftsman Sliding Compound Miter Saw. For example, price is an important consideration. You want to get the most value for your money. But other factors may also influence your decision, such as:

  • What kind of materials does it use? The material used in construction is one of the most important considerations. Each material has its pros and cons. For example, aluminum is stronger than glass but more prone to scratches, while plastic is less expensive than metal but can be more prone to cracking if you drop your phone on hard surfaces.
  • Does it have what you need? If you’re looking for a good product, you must first look at its features. The more features it has, the better. The more complicated the product is, the more expensive it will be. It’s important to find a balance between quality and price.
  • What is the quality of the item? The quality of the product is usually determined by its durability and how well it can handle wear and tear. This is especially true for Craftsman Sliding Compound Miter Saw, where poor-quality products may break down after a few months or less.
  • How much does it cost? Finally, price is important in choosing the right Craftsman Sliding Compound Miter Saw for yourself because not all products are priced equally. Sometimes, paying more can mean getting better quality products or even more benefits than what cheaper products provide.
  • Is this product worth my money? There are many different types of Craftsman Sliding Compound Miter Saw on the market today, so you need to find one that will give you good value for money without breaking the bank. You should also consider how sturdy it is and how much use it can get before needing replacement or repair.
  • Is it easy to use? There’s no point in buying a product if you have to spend hours figuring out how it works before you can use it properly. Ensure instructions are clear and easy to follow so you can start using your purchase without delay when you get home from the store.
  • How good is the customer service policy? If you want to be sure that you will be able to use the product without any hassle in case something goes wrong, then you need to know what kind of customer service the company offers.

CRAFTSMAN V20 7-1/4-Inch Sliding Miter Saw Kit, Cordless (CMCS714M1)

$249.00  in stock
3 new from $249.00
Free shipping
Amazon.com
as of September 7, 2022 7:36 pm

Features

  • POWERFUL MOTOR: 3,800 RPM motor of CRAFTSMAN miter saw is made for cutting 2X dimensional lumber, hardwoods, baseboard and trim with ease
  • SLIDE CAPABILITIES: The mitre saw has 8-inch cross cut at 90-degree and 5-1/2-inch cross cut at 45 degree
  • ADDED CAPACITY: The sliding miter saw cuts 3-5/8-inch nested crowns and 3-1/2-inch baseboards vertically
  • ACCURACY AND VISIBILITY: LED cut line positioning system
  • QUICK AND ACCRUATE: 9 casted miter detent stops for adjustments

Makita LS1219LX 12" Dual-Bevel Sliding Compound Miter Saw with Laser and Stand

$929.00  in stock
5 new from $929.00
Amazon.com
as of September 7, 2022 7:36 pm

Features

  • Unique 2-steel rail sliding system design offers single slide-glide operation
  • Increased capacity for up to 8" Crown molding (vertically nested), 6-3/4" baseboard (vertical), and 15" crosscuts at 90°
  • Includes a durable compact folding stand with transport wheels and a side handle for easier job site portability; features an aluminum tubular design weighing only 33.7 lbs.
  • In-front bevel lock for convenient operation
  • Dual dust collection ports provide excellent dust extraction performance.Supported up to 500 lbs

Skil 10" Dual Bevel Sliding Compound Miter Saw - MS6305-00

$299.00
$279.00
 in stock
4 new from $279.00
Free shipping
Amazon.com
as of September 7, 2022 7:36 pm

Features

  • POWERFUL 15 AMP MOTOR - Delivers 4,800 RPM for quick, detailed cuts
  • DUAL BEVEL – Perform cuts in four positive stop positions at 48° & 45° left, 0°, and 45° right
  • LED SHADOW LINE - Provides high precision cuts with greater accuracy than lasers
  • 2x12 CUTTING CAPACITY – Cross cuts lumber up to 2x12 at 90 degrees, and 2x8 lumber at 45 degrees
  • CUTS AT COMMON ANGLES - Cuts up to 50 degrees left and right with 11 positive stops at most used angles

ENGiNDOT Sliding Miter Saw, 10-Inch Single Bevel Compound Miter Saw with 15-Amp Motor, Double Speed (4500 & 3200 RPM), Laser Guide, 3 Blades, Bevel Cut (0°- 45°) for Wood, PVC or Soft Metal Cutting

$209.97
$199.97
 in stock
Amazon.com
as of September 7, 2022 7:36 pm

Features

  • 3 Blades & Powerful Motor: The ENGiNDOT sliding miter saw comes with 3 blades, two 10" 40T TCT blades for wood and plastic, and one multi-functional 10" 48T TCT blade for versatile use. Richer accessories provide a wide range of choice for your operation. Powerful 15-amp, 2000 Watt motor gives more power and durability.
  • 2 Adjustable Speed & Grand Cutting Capacity: By pressing the switch, you can convert between the two speeds (3200 RPM or 4500 RPM) effortlessly for more precise cutting, high speed for wood while low speed for metal and plastic, giving your cutting more choices. The max cutting capacity up to 3.54 x 13.19 inches at 90 degree and 1.77 x 13.19 inches at 45 degree, offers more possibilities for your work.
  • Bevel Cutting & Iron Blade Guard: The free bevel range from 0° to 45° allows you to do bevel cutting for more purposes. The angle of the miter table is -45°/ 0°/ + 45° and the positive angles in all these directions are 0°, 15°, 22.5°, 30° and 45° respectively. Solid iron self-retracting saw shield is more durable than other plastic and transparent saw shield, the teeth cover of the cutting blade can protect you from accidental mishaps.
  • Laser Guide: This 10-Inch single bevel compound miter saw equipped with laser guide, it can attached to accurately track real-time position and allows you to perform precise cutting.
  • What You Get: 1* ENGiNDOT sliding miter saw, 1* 10" multi-function blade, 2* 10" blades for wood, 1* M3 allen wrench, 1* dual-head wrench, 2* side support (packed on the machine), 1* clamping device (packed on the machine), 1* user manual, 1* dust bag.

Metabo HPT 10-Inch Miter Saw | Single Bevel | Compound | 15-Amp Motor | C10FCGS

 in stock
Amazon.com
as of September 7, 2022 7:36 pm

Features

  • MOTOR: 15 Amp motor delivers high power for the toughest of cuts generating a no-load speed of up to 5,000 RPM
  • LIGHTWEIGHT: Only 24.2 lbs. to facilitate maneuverability and portability
  • MITER ANGLE RANGE: 0-52 degrees, to the right and left for increased flexibility
  • BEVEL RANGE: 0-45 degrees, to the left with adjustable bevel stops for precision cuts
  • LARGE TABLE: Offers better material support with vice clamping system to secure work piece

DEWALT 12-Inch Miter Saw, 15-Amp, Single Bevel, Compound (DWS715)

$319.00
$249.00
 in stock
10 new from $249.00
2 used from $196.32
Free shipping
Amazon.com
as of September 7, 2022 7:36 pm

Features

  • Stainless-steel miter detent plate of 12-inch miter saw blade comes with 14 positive stops
  • The mitre saw features the precise miter system and machined base fence support
  • Tall sliding fence of DEWALT miter saw supports 5-1/2-inch base vertically
  • Bevels 0 degree - 48degree to the left and 0 degree- 3degree to the right. Tool height-15 inch
  • 2-inch x 8-inch dimensional lumber cross cut capacity at 90 degree and 2-inch x 6-inch dimensional lumber at 45 degree

JET JMS-12X, 12-Inch Dual-Bevel Compound Miter Saw, 1Ph 115V (707212)

$649.99  in stock
4 new from $649.99
Free shipping
Amazon.com
as of September 7, 2022 7:36 pm

Features

  • GREATER VERSATILITY: Adjustable left and right fence and extension tables.
  • FAST ANGLE ADJUSTMENTS: Change miter angles quickly with the single-motion thumb lever.
  • EFFICIENT DUST COLLECTION: 2-1/2" adapter connects port to a dust collection bag.
  • PRECISE CUT LINE REFERENCE: Razor-thin high-visibility red laser.
  • MAXIMUM CONTROL: Ergonomic, D-shaped, ambidextrous, rubber grip handle.

DEWALT Miter Saw, Single Bevel, Compound, 10-Inch, 15-Amp (DWS713)

$229.00  in stock
12 new from $227.92
3 used from $178.84
Free shipping
Amazon.com
as of September 7, 2022 7:36 pm

Features

  • Stainless-steel miter detent plate of the 10-inch miter saw blade comes with 14 positive stops
  • The mitre saw has a precise miter system and machined base fence support
  • Tall sliding fence of DEWALT miter saw supports 4-1/4-inch base vertically
  • Bevels 0 degree - 48degree to the left and 0 degree- 3degree to the right
  • 2-inch x 6-inch dimensional lumber cross cut capacity at 90 degree and 2-inch x 4-inch dimensional lumber at 45 degree

Makita LS1219L 12" Dual-Bevel Sliding Compound Miter Saw with Laser

 in stock
Amazon.com
as of September 7, 2022 7:36 pm

Features

  • Unique 2-steel rail sliding system design offers single slide-glide operation; reduced saw footprint allows operation flush against a wall
  • Increased capacity for up to 8" Crown molding (vertically nested), 6-3/4" baseboard (vertical), and 15" crosscuts at 90
  • In-front bevel lock for convenient operation
  • Dual dust collection ports provide excellent dust extraction performance
  • Innovative direct drive motor and guard system is engineered for increased vertical cutting capacity (6-3/4")

Metabo HPT Sliding Compound Miter Saw | 12-Inch Blade | Double Bevel | Laser Marker | 15-Amp Motor | 5 Year Warranty | C12RSH2S

$449.00
$349.00
 in stock
3 new from $349.00
Free shipping
Amazon.com
as of September 7, 2022 7:36 pm

Features

  • AWARD: Rated Best Miter Saw for the Money for Pros by Pro Tool Reviews 2022
  • MOTOR: Powerful 15 Amp motor to tackle tough cutting jobs with ease
  • LASER: Laser marker system from Metabo HPT increases cutting accuracy
  • FENCE: Large sliding fence raises fence height to 5.125 In. to cut up to 7.5 In. crown molding vertically
  • MITER: 0-57 degree miter angle to the right and 0-45 degree to the left for flexibility

Best Craftsman Sliding Compound Miter Saw: Price Comparison

Best Craftsman Sliding Compound Miter Saw: Buying Guide

It would be great if every purchase we made was carefully thought through and planned. We would budget, save and only make the purchase if we could pay for it in cash, right? The truth is that almost everyone is vulnerable to making impulse purchases, both large and small. But while it can be fun at the moment, impulse shopping can also cause feelings of guilt and regret, not to mention financial hardship and debt. So how do you find the middle ground?

How we choose

We broke down our research and analysis process into different rating factors. We use each product’s weighted performance in each category to determine our overall rankings, but we recommend you pay closer attention to the most important criteria. Our experts recommended the following factors when shopping Craftsman Sliding Compound Miter Saw:

  • Quality
  • Specifications
  • Price
  • Durability
  • Customer Feedback
  • Functionality
  • Brand

FAQs

#1. How Much Should I Spend on a Craftsman Sliding Compound Miter Saw?

Generally, a Craftsman Sliding Compound Miter Saw is going to live with you for years. Paying more for your product will reward you every time you fast open the lid with increased your speed, better quality accuracy and a sweet view. Again, the average cost of a new Craftsman Sliding Compound Miter Saw is between $$ and $$$. Sure, you get out on some luxury features.

#2. How to use Craftsman Sliding Compound Miter Saw carefully?

First, it’s always important to read the instructions from start to finish before using Craftsman Sliding Compound Miter Saw for the first time. This is important because it’ll help you avoid mistakes that could result in wasting your money or hurting yourself.

#3. How to keep the Craftsman Sliding Compound Miter Saw safe?

Read the warnings on the packaging. The warnings will let you know if there are any special considerations you should be aware of about using the Craftsman Sliding Compound Miter Saw.

Follow all safety precautions listed on the label, and keep children away from your cleaning supplies!

Make sure that any cleaning solution you use is compatible with your equipment.

Conclusion

In general, all of the above Craftsman Sliding Compound Miter Saw are pretty good. If you buy any of them, you will get what you want. Of course, it is worth mentioning that the best product is the one that meets your unique requirement. These Craftsman Sliding Compound Miter Saw are very high quality and are built to last. Thanks for reading, and happy shopping!

Finally, it is time to review these top 10 best products. Now you know the best ten products of this year’s marketplace. And now it’s up to you which one you prefer now. You can decide to buy only one or maybe more. We trust that this article has helped you make a decision, and we strongly believe the items we are reviewing and presenting here in this article are made of the finest quality.

5/5 - (388 votes)